HexaSpace Flooring Installation Instructions

 

1. Begin at the Entrance

• Start placing the tiles from the garage entrance, leaving a 5-10 mm gap between the tiles and the walls. This allows space for any expansion due to temperature fluctuations.

2. First Row Alignment

• Ensure the female (looped) sides face away from the entrance and the wall as shown. Finish laying the first row.

3. Attach the Ramps

• Snap the female ramp edges (looped) onto the male side of the tiles for easy entry and exit with vehicles.

4. Garage Door Area

• Ensure the tiles around the garage door are laid carefully to avoid obstructing the door’s operation.

5. Centered Design (Optional)

• If you prefer a centered layout, adjust the alignment before starting to achieve equal spacing on both sides.

6. Laying Remaining Tiles

• Continue laying the tiles across the garage floor. When you approach the walls, some tiles may need trimming to fit perfectly.

7. Cutting to Fit

• Use appropriate tools (such as a fine-tooth saw) to cut tiles as needed, ensuring they fit snugly along the edges.

8. Final Enjoyment

• After installation, enjoy the sleek and functional new flooring system from HexaSpace!

For assistance, feel free to contact us at: info@hexspace.com.au

 

© 2024 HexSpace. All Rights Reserved.